MSH1250-ESSS 1.25” / 31.75mm - £117.98

 

Downloads for - MSH1250-ESSS 1.25” / 31.75mm

To save these downloads you need to right click on the download link, then select "Save Target As...". Then you can select a location on your computer to save it to.

 

Download File MSH Seal DATASHEETMSH Seal DATASHEET

Part of the Crest Pumping Services, Product Range, Range

EPDM Body

Silicon Carbide rotating face

Silicon Carbide stationary seat

Dimensionally interchangeable with other manufacturers

 

 

Applications include clean water, sewage water, oil and other moderately corrosive fluids. 

 

The MSH-ESSS mechanical seal range are internally mounted either as single or double (doubles would require an External_Flush )

 

Manufactured from EPDM bodies with silicon carbide face and seats, each mechanical seal is resistant to most chemicals and concentrations. See our Chemical_Resistance_Table for the seal best suited to your application.

 

Operating Conditions

 

Temperature:     -20°C to +120°C

 

Pressure:           Up to 1.8MPa

 

Speeds:            Up to 15 m/s

 

Please note these are general ratings only and may vary according to temperature and pressure. Please refer to Crest for specific application recommendations.