Protection for Double Mechanical Seals

8 Barg Pressure Rating

Standard Equipment

Includes all Guages and Instrumentation

Simple to Install

Low Maintenance Requirement 

Automatic Cut-Out to Protect Chemical Pumps and Magnetic Seal

APPLICATIONS

Many pumping applications demand a double pressurised mechanical seal arrangement due to the crystalline or abrasive nature of the liquid or for health and safety reasons.

For these duties the SS24 sealing system is ideal, providing a safe and simple method for pressurising double seals. Acting as a totally self-contained system the SS24 also provides protection for the pump against dry running.

The SS24 sealing system has been designed to provide a solution to the problem of pressurised flushing of a double mechanical seal at an economic price. Totally self-contained, the system is delivered complete with sight glass, pressure gauge, pressure switch and quick-fit nylon hose and couplings.

Operating on the thermo-syphon principle which does not require any external pumping equipment, the reservoir is pressurised to one to two bar above the maximum discharge pressure of the pump. A pressure switch is wired to the motor starter so that if, for any reason, the pressure in the seal pot drops below the required level the motor will be cut-out and, if required, an alarm signal sent.

Installation is quick and simple and little maintenance is required.

Optional Accessories Include:

Steel fabricated mounting stand
Hand pressure pump