info@crestpumps.co.uk | 01425 627700

 

drum and barrel pumps

RANGE > DRUM AND BARREL PUMPS

Drum and Barrel range of chemical process pumps.

Our range of Drum pumps are designed to resist any types of corrosive laden liquids. The special design of the CBP range ensures that spillages are collected back in the drum container.

Commonly known as drum emptying pumps, stick pumps or barrel pumps – The Crest Pumps Group range of Drum pumps set the industry standard for combining efficiency and reliability when processing chemicals, viscous liquids or sticky media from a barrel. This therefore ensures keeping operating costs to a minimum.

The CBP range processes media by using a system of suction and discharge valves to displace fluid, the fluid enters the pump chamber at the inlet and is pushed through the outlet by the action of the piston.

Available with a fully-interchangeable electric or pneumatic motors, these pumps have an open impeller than allows for continuous pumping of corrosive liquids with a high viscosity of up to 600cP with a pneumatic motor and up to 900cP with a electric motor (at 20c). The electric drive pumps are also fitted with a safety cut-out switch that prevents accidental restart after a power outage.

 

flow   length   CHOICE   small psd   PPORTABLE   temmp   NO MECHANICAL   Small2-biffa   RUNDRY

Drum and barrel pumpsDrum image 2

Pump Body Configuration

TRP Polpropylene Body

The CBP TRP body is made from polypropylene and fits either an electric or pneumatic motor.

The pump is most efficient when positioned vertically and the pump body is immersed in the drum.

TRP Info

 

TRF PVDF Body

The CBP TRF body is made from PVDF and fits either an electric or pneumatic motor.

The pump is most efficient when positioned vertically and the pump body is immersed in the drum.

 

TRA Stainless Steel Body

The CBP TRA body is made from 316 Stainless Steel and fits either an electric or pneumatic motor.

The pump is most efficient when positioned vertically and the pump body is immersed in the drum.

 

TRAX ATEX 316 Stainless Steel Body

The CBP TRAX is made from ATEX ready 316 stainless steel and fits an electric motor.

The pump is most efficient when positioned vertically and the pump body is immersed in the drum.

 

Electric Motors Configuration

CBP

Pneumatic Motors Configuration

CBP neumatic

Chemical Compatibility Guide

Check out our free and easy to use Chemical Compatibility guide for up-to-date information on all of the chemical applications we commonly process.

 

25 Ways to Break a Pump

Download our PDF on the most common mistakes users make when running a pump and how to fix these mistakes before they cause a problem on your process line.
DOWNLOAD HERE

 

INDUSTRIES

The CBP range of drum and barrel pumps are suited for a wide range of tough and sticky applications. Below are just some of the applications handled by our range;

  • Pharmaceutical & Cosmetics – Mascara, Petroleum Jelly, Face Creams, Magnesium and Aluminium Hydroxide, Toothpaste, Wax and Suntan Lotions, Medical Adhesives, Suntan Lotion, Hair Creams, Shampoo, etc
  • Food Industry – Honey, fruit juices, concentrates, jams, purees, butter products, meat fillings, particles applications, etc.
  • Chemical & General Industrial – Paints, resins, adhesives, chemicals, polymers, latex, high viscosity grease, mastics, ink etc.
  • Petrochemical – Fuels, oil, aerobic digestion by-product, etc

 

Need more information? Talk to our expert engineers. Give us a call on 01425 627700.

OR EMAIL US

 

Scroll Up