ENGIE Fabricom – SHL Range

ENGIE Fabricom – SHL Range 2018-12-18T13:44:01+00:00

Project Description

“Engineering and design consultancy, ENGIE Fabricom, commissioned Crest Pumps to supply eight SHL pumps for the new waste to energy plant built in Hull”

ENGIE Fabricom in the UK has a wealth of 40 years’ experience in the Oil, Gas, Power, Chemical, Energy From Waste and Renewables industries.

Humber is the biggest exporter of waste to Europe – hundreds of thousands of tonnes are loaded onto ships bound for environmentally conscious Scandinavia and Germany, where it is used to fuel district heating plants.

In 2017, a £200m power plant was built in Hull to intercept 250,000 tonnes of mostly black bin ‘residual’ household waste from councils across the UK, which has already had valuable steel and non-ferrous metals like aluminium taken out. The project doesn’t involve incineration, but a process called fluidised bed gasification where waste is suspended in air. Without sufficient oxygen to burn it, it turns into ash and gives off a “syngas.” Essentially it breaks it down to smaller molecules which gives a much purer combustion process. The power for the boiler is gas not waste.

ENGIE Fabricom provides engineering design consultancy to M+W the construction company delivering the new facility. ENGIE provides expertise and support by process engineering and design of the Water Steam Cycle. It commissioned Crest Pumps to supply eight SHL pumps, 4 self priming, for pumping effluent water at <300m3/hr. The pumps were delivered to spec and on time.


Chemical – Chemical applications include chemical transfer, dosing, re-circulation, filtration, fume scrubbing and tanker off-loading.
Petrochemical – Previous petrochemical installations include high temperature, high pressure, highly viscous applications as well as chemical injection, re-circulation, off-loading and solid handling.
Water Treatment – Providing reliable process pumps to the UK’s largest wastewater treatment providers, for chemical transfer, desalination, reverse osmosis, water treatment and tanker unloading.
Pharmaceutical – Pharmaceutical companies have relied on Crest Pumps to provide pumps for ATEX requirements, chemical injection, CIP pumping, solid handling, high viscous medias and highly toxic applications.
Biofuels – Fully ATEX certified process pumps for transfer of liquids in explosive atmospheres, solids handling, tanker unloading, recirculation and transfer.
Energy Generation – Pumps supplied for various energy generation applications, including wind turbine, solar, and Vanadium redox flow batteries.
Marine – Centrifugal pumps supplied for various below deck applications including ballast water treatment, electrolysis, desalination and sea water cooling systems.

Crest Magnetic Drive Pumps – Utilised By