Contents
What is a liquid ring vacuum pump?
How does a liquid ring vacuum pump work?
Can liquid ring pumps handle dirty or wet gases?
Helpful tips for selecting & operating a liquid ring vacuum pump
SR liquid ring vacuum pumps from Crest Pumps
Liquid ring vacuum pumps are a proven and reliable vacuum solution used across a wide range of industries. Known for their ability to handle wet gases, vapours, and even small amounts of liquid carryover, they are often chosen where other pump technologies struggle.
This guide explains how liquid ring vacuum pumps work, where they are best used, their advantages and limitations, and what to consider when selecting one. We’ve also included commonly asked questions and an overview of the SR (Salvatore Robuschi) liquid ring vacuum pumps available from Crest Pumps.
A liquid ring vacuum pump creates vacuum using a rotating liquid rather than close mechanical tolerances or oil-sealed vanes.
Inside the pump casing, a liquid — most commonly water — forms a rotating “ring” that seals, compresses, and expels gas. This simple but effective principle makes liquid ring pumps especially well-suited to wet, dirty, or vapour-laden applications.
Because the gas never comes into contact with oil or tight internal clearances, liquid ring pumps are extremely tolerant of challenging process conditions.
The working principle is straightforward:
The liquid ring acts as a seal, compressor, and coolant all at once, which is why these pumps are so robust and forgiving in operation.
Liquid ring vacuum pumps are commonly used where moisture, vapours, or fluctuating loads are present. Typical applications include:
Chemical processing – distillation, evaporation, solvent recovery
Pharmaceutical and food industries – drying, deaeration, filtration
Pulp and paper – vacuum dewatering and forming processes
Power generation – condenser evacuation and air removal
Wastewater treatment – vapour extraction and gas handling
General industrial vacuum – where reliability is more important than deep vacuum levels
They are often chosen specifically because other pump types would suffer damage or reduced life in the same conditions.
Liquid ring vacuum pumps offer several important benefits:
Excellent Handling of Wet and Condensable Gases
These pumps are ideal for applications involving steam, vapours, or saturated gases. Condensation inside the pump is not a problem — it’s part of normal operation.
Oil-Free Vacuum
Because the pump uses a liquid seal rather than oil, there is no risk of oil contamination in the process gas.
Simple, Robust Design
With relatively few moving parts and no metal-to-metal contact inside the pumping chamber, liquid ring pumps are known for long service life and steady performance.
Quiet and Low Vibration
The liquid ring naturally dampens noise and vibration, making these pumps quieter than many alternative technologies.
Low Maintenance Requirements
Routine maintenance typically focuses on bearings, seals, and the condition of the sealing liquid, rather than frequent internal rebuilds.
While liquid ring vacuum pumps are extremely versatile, they are not suitable for every application.
Understanding these limitations early helps ensure the correct pump is selected for the application.
Yes — this is one of their main advantages. They tolerate moisture, vapours, and small amounts of liquid carryover far better than many other pump types.
Good pump selection is as much about understanding the process as it is about choosing a model.
Crest Pumps supply the SR (Salvatore Robuschi) VS series liquid ring vacuum pumps; a well-established range designed for industrial vacuum applications.
Key Features of the SR VS Range
Beyond supplying the equipment, Crest Pumps provide technical support, pump selection advice, and aftersales assistance to ensure the right solution is chosen for each application. Talk to us today!